4.5KW ATC Automatical Tool Changer Air Cooled Spindle Motor BT30 24000rpm 220V

Description

4.5KW ATC Automatical Tool Changer Air Cooled Spindle Motor BT30 24000rpm 220V
From CN via standard shipment within 2 days handling time ship out for you
Package include:
1 x 4.5KW ATC Air cooled spindle motor
( BT30,24000rpm,4 bearings,800Hz, 220V )
1 x Aviation plug
Note:
We also have 380V,if you need,pls contact us before purchase.Default is 220V.
（380V style has stock in EU warehouse, 220V style has stock in US warehouse.）
100% Brand New and High Quality!!!
Product Description
4.5kw air-cooled automatic tool change spindle is a high-end woodworking company designed to develop
high-power electric spindle bearings imported fom Germany, high-precision bearings, high precision, long life.
The electric spindle fan cooling with Road gas seal structure, automatic tool changer with ISO30 shank, feast
automatic tool change and improve the efficiency of the automated processing.
Procuct Name
4.5KW air-cooled ATC spindle
Power
4.5KW
Voltage
380V(220V also in stock)
Torque
3.6 Nm (Torque peaked at 12000 rpm)
Speed
12000~24000rpm/min
Frequency
800Hz
Current
8A
Collet
ISO30
Pole number
4
Cooling Type
air cooling
Barometric pressure
6 bar
Fixed way
Two side,screw fixed
Number of phases
3
Bearing
2*7008  2*7006
Warranty
1 year
Packing list
1pcs spindle
T
he usages of the product and warnings
M
atters need attention when
you
install this spindle
1.
When installed, please carefully, pay attention to personal safety and to avoid injuries occurred during the installed process;
2.
Do not use any tools tapping spindle;
3.
Do not use sandpaper and grinding wheel to wipe or grind in
axis core and taper hole;
4.
Use special removal tool to remov the lock nut and the tool;
5.
Untrained personnel can not disassemble and operate electric spindle;
Attention to maintenance and maintenance
1.
Electric spindle storage temperature is 20
℃
± 10
℃
, humidity
≦
85%, to allow time to store up to three months;
2.
Electric spindle most suitable ambient temperature is 20
℃
± 10
℃
, bearing life can achieve the desired optimum value;
3.
The power cord must take waterproof measure, electric spindle housing must be grounded;
4.
Electro-spindle must not exceed nameplate parameters;
.
5.
Not allowed to use any mechanical way to forced braking
in
the shaft;
6.
after
using
the
spindle every day,
you
should wipe spindle taper,then smear with rust oil;
7.
Workplace must be clean, there should be strict dust control measures to prevent foreign matter enter the spindle.
Product common malfunctions&method of exclusion
Fault phenomenon
Reason
Method of exclusion
Electric spindle is not running after boot
1
、
No inverter power output or set incorrectly
Check that VFD supply three-phase output voltage and setting method
2
、
Spindle plug is not inserted
Check the electrical spindle plug and connection.
3
、
Bad plug connector
4
、
Bad
stator
line package
Replace line package
Shutdown after a few seconds of the boot
1
、
Start time is too short
Increase the acceleration time
2
、
Electric spindle high temperature cause line package insulation damaged
Replace line package
3
、
Electric spindle lose phase to run,then cause overcurrent protection blackout
Check the electric spindle connection
Electric spindle smoking or the housing hot after a few second of the boot
1
、
Inverter output voltage, frequency are not match the use of electric spindle voltage and frequency
Check the VFD and the spindle voltage, frequency
2
、
The VFD is not set correctly
Reset the VFD
Locking nut loose when it is started
Wrong direction of rotation
Change the direction of rotation
Spindle have big noise and vibration
1
、
Bearing wear seriously
Replace the bearing
2
、
Precision of parts damaged,it’s effect dynamic balance
Calibration of dynamic balance
3
、
Big beat of Spindle
Replace the spindle
Locking nut loose when it is stoped
Stop time is too short
Increase the deceleration time
Shipping
Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately
We ship to worldwidebut If your country’s custom is strict, please contact us before you bid to check detail and confirmed.
Delievry time
USA                post service                round 10-18 business days
Canada         China post                   round 25-40 business days
Australia      China post                   round 20-35 business days
Western EU(Germany,UK,France, etc)            China post                    20-35 business days
Asia,South America,other countries               Chins post                  round 15-40 business days
Note:above offer is default delivery way,if you need fast delivery like as DHL/UPS or post service pls inform us to confirm the shipping cost before you bid
Above DHL/UPS offer is without remote fee,if your post code is remote it need extra cost.
All items will be shipped within 1-3 business days upon receipt of payment
Payment
We accept paypal payment,all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery)
Payment must be made within 48hours of the auction end time
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
Problem&Feedback
Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
We are a new member in ebay now,and need understand both of sides
Pls email us before you want to leave any negative feedback
Refund
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,after confirm we will refund your money,but the delivery charge paid by buyer.
Contact us
Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
Customer’s satisfaction is very important to us.