3KW ER20 Water Cooling CNC Spindle Motor Kit & HY VFD+100mm Clamp+Pump+Collet

Description

3KW ER20 Water Cooled CNC Milling Spindle Motor+HY VFD+100mm Clamp+Pump+Collet
From CN via fast shipment within 2 days handling time send out for you
1 x 3Kw Water Cooled Spindle Motor
ER20
(220V,400Hz,24000rpm,4 bearings)
1 x 3
Kw
Inverter VFD
4HP
220V input with 220V output
1 x 100mm cast aluminium bracket
1 x 75W Water
pump 220V
6M Water pipe
1 Set ER20 collets
1-13mm
3KW WATER-COOLED SPINDLE MOTOR ER20 CNC MILLING GRIND
Specification:
Size:
100x220mm(Middle body diameter:100mm x Length:220mm)
Power:
3Kw
Voltage:
220V
Frequency:
0-400Hz
Speed:
24000rpm
Cooling:
Water Cooled
Collet:
ER20
Runout off:
less than 0.02mm
Bearing:
4pcs bearing
Bearing Lubrication:
Grease
Power Interface: Professional aviation Interface, Interface
1,2,3,4
marked
1,2,3
respectively connected to the inverter output end of the (
U, V, W
), 4 ground wire this interface must be safe ground.
3KW Inverter VFD 220V input with 220V output
Product
Feature:
1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
2)Easy PLC function can realize 16 legs of speed and inverter control function;
3)RS485 communication port, adopting standard international MODBUS main circuit control;
4)With extremely strong anti-jamming capability
5)Low output ratting torque0.5HZ-150%, low speed running ability;
6)Carrier adjustable by 16KHZ, completely soundless working environment;
7)Broad voltage working area, normal running in 304V-456V;
8)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
9)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
10)With perfect error protection and short circuit starting protection capability;
Tech parameters
:
1) Input Voltage: 220V(+/-15%)
2) Output Voltage: 0-220V
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
7) Current: 13A
8) Power: 3Kw
9) Warranty: 1 year from the date you purchased
Advantage
:
1)
Control mode is SPWM,it is very easy to use and convenient;
2) Protection functions are very strong;
3) Fin over-heat protection;
4) Overload protection;
5) Fuse protection;
6) Restart after instant stop,stall protection;
7) Powful function;
8) Reliable quality.
Specification
Series
HY inverters
Control Mode
SPWM
Input Power
380V class:380V(+/-15%);220V class:220V(+/-15%)
5-Digits Display & Status Indicator Lamp
Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
Communication Control
RS-485
Working Temperature
-10~40 Celsius Degrees
Humidity
0-95% Relative Humidity(without dew)
Vibration
Below 0.5G
Frequency Control
Range
0.1~2500.0Hz
Accuracy
Digital: 0.1%(-10~40 Celsius Degrees); Analog: 0.1% (15Celsius Degrees---45Celsius Degrees)
Setting Resolution
Digital: 0.1Hz; Analog: 0.1% of max. Operating frequency
Output Resolution
0.1Hz
Operator Setting Method
Press directly keys to set.
Analog Setting Method
External Voltage 0-5V,0-10V,4-20mA,0-20mA.
Other Functions
Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
General Control
Ramp Control
Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
V/F
Curve
Set V/F curve at will.
Torque Control
Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
Multi-Inputs
6 multi-function input terminals for 8speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Multi-Outputs
5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
Other Functions
Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control,Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Protection Functions
Overload Protection
Electronic relay protection motor drive
Drive(for constant torque  150% per min. for the kinds of fan 120% per min.)
Fuse
Protection
When the fuse breaks, the motor will stop.
Over-voltage
220V class:DC Voltage >400V
380V class:DC Voltage >800V
Under-voltage
220V class:DC Voltage <200V
380V class:DC Voltage <400V
Restart After Instant Stop
Restart with Frequency Track after Instant Stop
Stall Protection
Stall protection in ramp operation
Output Short Circuit
Electrical circuit protection
Other Functions
Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
3. 100mm cast aluminium bracket
4. 75W CNC spindle motor water pump 3.2m 220VAC
Specification:
Pump length:3.2m
Voltage:220-240VAC
Power:75W
Flow:3000L/H
Size:150x80x140mm
Water nozzle diameter:6mm
Application:
fit for 0.8kw,1.5kw,2.2kw,3kw,water cooled spindle even 4kw and 5.5kw too
5.
ER20 Spring Collet (14pcs,1mm-13mm)
(1mm, 2mm, 3mm,
3.175mm,
4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm
)
Product Description
Out dia (D1):
11.5mm
Height (H):18mm
Hole dia (D2):1-13mm
Run-out tolerance 0.015mm
First class 1065 carbon steel
Hardened & precision ground
Shipping
Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately
We ship to worldwidebut If your country’s custom is strict, please contact us before you bid to check detail and confirmed.
Delievry time
USA                post service                round 10-18 business days
Canada         China post                   round 25-40 business days
Australia      China post                   round 20-35 business days
Western EU(Germany,UK,France, etc)            China post                    20-35 business days
Asia,South America,other countries               Chins post                  round 15-40 business days
Note:above offer is default delivery way,if you need fast delivery like as DHL/UPS or post service pls inform us to confirm the shipping cost before you bid
Above DHL/UPS offer is without remote fee,if your post code is remote it need extra cost.
All items will be shipped within 1-3 business days upon receipt of payment
Payment
We accept paypal payment,all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery)
Payment must be made within 48hours of the auction end time
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
Problem&Feedback
Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
We are a new member in ebay now,and need understand both of sides
Pls email us before you want to leave any negative feedback
Refund
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,after confirm we will refund your money,but the delivery charge paid by buyer.
Contact us
Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
Customer’s satisfaction is very important to us.
CNC 3KW Water-Cooled Spindle Motor ER20 & Inverter VFD & Clamp &75W Pump &Collet
3KW ER20 Water Cooled Spindle Motor & HY 3KW VFD 220V & 100mm Clamp&Pump& Collet
CNC 3KW Water cooled spindle motor ER20 + HY VFD Inverter+Clamp+Pump + Pipe Kit
3KW Water Cooled Spindle Motor ER20+3KW VFD 220V+100mm Clamp+Pump+Collet CNC Kit
3KW 220V ER20 Water Cooled CNC Spindle Motor & HY Inverter VFD & Pump & Collet